Puffco Peak Pro 3D Chamber in El Paso, Ceramic Atomizer
About this item
- Ceramic 3D replacement chamber for the Puffco Peak Pro
- Heats from the ceramic sidewalls for even, full-flavored draws
- Sensor-based real-time temperature control
- Original size and XL size, both in stock
- XL adds a 78% larger bowl plus an XL Joystick Cap
- Single-piece unit, cleaned by soaking in isopropyl alcohol
- Fits both the original and new Peak Pro (not the older Peak)
- Backed by Puffco's 30-day warranty
Product description
Need a fresh Puffco Peak Pro 3D Chamber in El Paso? This ceramic replacement atomizer drops right into your Peak Pro, and you can walk into any of our 10 neighborhood stores and grab one the same day.
Ceramic 3D heating, the Puffco way
The Peak Pro 3D Chamber heats from the sides, not the bottom. Heat traces sit inside the ceramic walls, so warmth wraps around your material for even, full-flavored draws. Sensor-based temperature control keeps things steady in real time. It is a single-piece ceramic unit, built to slot into your Peak Pro and bring the chamber back to life.
Pick your size: Original or XL
Two sizes sit on our shelves. The Original chamber is the standard 3D replacement. The XL steps up with a 78 percent larger bowl, so you can load fuller and rip harder with less reclaim. The XL ships with an XL Joystick Cap built to match its deeper chamber. Both fit the Peak Pro, original and new. Neither fits the older first-generation Peak.
Set up and care at home
Before your first session, update your Peak Pro firmware in the Puffco app over Bluetooth, then drop in the chamber. To clean it, soak the whole single-piece unit in isopropyl alcohol; there are no parts to take apart. Stop by any El Paso Smoke Shops, check store stock, reserve online, and pick yours up the same day with a valid 21+ photo ID at the counter.
Swing by your nearest El Paso Smoke Shops for the Puffco Peak Pro 3D Chamber. Free in-store pickup, friendly hosts, and same-day availability. Find your store, confirm stock, and grab one today.
Specifications
- Brand
- Puffco
- Device Type
- Replacement atomizer chamber for the Puffco Peak Pro concentrate e-rig
- Generation
- Peak Pro 3D
- Atomizer Type
- Ceramic concentrate (dab) chamber, single-piece, non-disassemblable
- Chamber Material
- Ceramic, with heat traces embedded in the walls (side heating)
- Heating
- 3D ceramic sidewall heating with even heat distribution
- Temperature Control
- Sensor-based, real-time
- Compatibility
- Puffco Peak Pro only (original and new); does not fit the older Peak
- Sizes
- Original; XL (78% larger bowl, includes XL Joystick Cap)
- XL Joystick Cap
- Included with XL; only compatible with the XL chamber
- Firmware Update Required
- Yes, via the Puffco app over Bluetooth before use
- App
- Puffco Connect (added vapor control on XL)
- Cleaning
- Soak the whole chamber in isopropyl alcohol
- Pack
- Single chamber (not a multipack)
- Warranty
- Puffco 30-day warranty
- Intended Use
- Concentrates only; not for tobacco, nicotine, or e-liquid
- Price
- $74.99-$99.99
Questions & Answers
How much is the Puffco Peak Pro 3D Chamber in El Paso?
It runs $74.99 for the Original size and $99.99 for the XL at El Paso Smoke Shops. Check your nearest of our 10 stores for current stock, reserve online, and pick it up the same day with a valid photo ID.
What is the difference between the Original and XL 3D Chamber?
The Original is the standard 3D ceramic replacement chamber. The XL has a 78 percent larger bowl so you can load more and get bigger draws with less reclaim, and it comes with an XL Joystick Cap that only fits the XL chamber.
Does the 3D Chamber fit my Puffco Peak Pro?
Yes, both sizes fit the Peak Pro, including the original and the newer model. It does not fit the older first-generation Peak. If you are unsure which device you have, our hosts at any El Paso location can help you confirm.
Do I need to update firmware before using it?
Yes. Open the Puffco app, connect to your Peak Pro over Bluetooth, and run the latest firmware update before you install the new chamber. This makes sure your device recognizes the 3D Chamber and heats it correctly.
How does the ceramic 3D Chamber heat?
Heat traces are built into the ceramic walls, so it warms your material from the sides instead of the bottom. Sensor-based real-time temperature control keeps the heat even, which Puffco designed for consistent flavor draw after draw.
How do I clean the Peak Pro 3D Chamber?
It is a single-piece unit with nothing to take apart. To clean it, soak the whole chamber in isopropyl alcohol, then let it dry fully before reinstalling. Regular cleaning helps keep flavor crisp and the chamber performing well.
Is the Peak Pro 3D Chamber for use with nicotine or vape juice?
No. This is an empty replacement chamber for concentrates only. It is not for tobacco, nicotine, synthetic nicotine, or e-liquid of any kind. It ships empty as hardware, and you supply your own legal concentrate.
Does it come with a warranty?
Yes, the Peak Pro 3D Chamber is backed by a Puffco 30-day warranty. Hold on to your receipt from your El Paso Smoke Shops purchase, and reach out to us or Puffco if you run into a defect within that window.
Can I buy the 3D Chamber the same day in El Paso?
Yes. We stock the Puffco Peak Pro 3D Chamber across our 10 El Paso Smoke Shops locations. Check store stock online, reserve it, and pick it up the same day at the counter with a valid 21 and older photo ID.
Vape-related accessory sold to adults 21 and older only. We check a valid photo ID at the counter at all 10 of our El Paso locations. This is an empty replacement chamber for concentrates; it is not for tobacco, nicotine, or e-liquid. In-store pickup only.
