Clover 3D Grip Glass Hammer Bubbler in El Paso, Color-Changing
About this item
- Handheld hammer bubbler in thick borosilicate glass
- Small water chamber cools every draw
- Diffused downstem for a broken-up, water-cooled pull
- Bumpy 3D grip texture keeps it steady in hand
- Color-changing clear base with red and blue worked lines
- Stands upright on its own between sessions
- Carb hole on the right side to clear the chamber
- Pocket-size, no big base to carry
Product description
Want the Clover 3D Grip Bubbler in El Paso? It is a handheld hammer bubbler in thick borosilicate glass. A little water and a diffused downstem cool every draw. Use the live stock check to see which El Paso Smoke Shop has it, reserve online, and pick it up the same day.
What a bubbler is, in plain terms
A bubbler is the middle ground between a dry hand pipe and a full water pipe. It is a glass pipe with a small built-in water chamber. Add a little water, and each pull passes through it, so the draw comes through cooler than a dry pipe. Yet it stays pocket-size, with no big base to carry. The 3D Grip is a hammer shape, so it rests flat on the table and stands upright when you set it down.
How the 3D Grip is built
This piece is made from borosilicate glass, the same thick, heat-resistant glass used across Clover’s bubbler line. A diffused downstem breaks the smoke into smaller bubbles as it passes through the water. The bowl runs 16mm wide and 18mm deep, and there is a carb hole on the right side to clear the chamber. The whole pipe is about 161mm long and weighs close to 194g, so it has real hand-feel without being bulky.
Grip you can feel and a color that shifts
The 3D Grip earns its name with a bumpy, worked-glass texture that gives your fingers something to hold. The clear base carries red and blue worked lines, and the glass is color-changing, so the look deepens with use. It is a left-handed layout with a flat mouthpiece. Set it down and it stands on its own, ready for the next round.
Cleaning and everyday care
Keep it clear with a simple soak. Empty the water after each session, then rinse with warm water. For a deep clean, use isopropyl alcohol and coarse salt, shake gently, rinse well, and air dry. Borosilicate handles normal handling, but it is still glass, so it can chip or crack if you drop it. Treat it with care and it stays clear for a long time.
Swing by your nearest El Paso Smoke Shops for the Clover 3D Grip Bubbler. Friendly hosts, same-day in-store pickup, and across El Paso. Find your store, check stock, and grab yours today with a valid 21+ photo ID at the counter.
Specifications
- Type
- Handheld hammer water bubbler
- Material
- Borosilicate glass
- Glass Technique
- Worked
- Style / Design
- Hammer, color-changing
- Color
- Clear base with red and blue worked lines
- Texture
- Bumpy 3D grip
- Percolator / Diffusion
- Diffused downstem, straight tube (1)
- Bowl
- 16mm wide x 18mm deep
- Carb Hole
- Yes, right side
- Mouthpiece
- Flat, 3mm
- Dimensions
- 161mm long x 73mm x 51mm
- Glass Thickness
- 3mm
- Weight
- 193.7g
- Handedness
- Left handed
- Stands Upright
- Yes
- Use
- Legal dry herbs and tobacco
- Age
- 21+
Questions & Answers
Is the Clover 3D Grip glass hammer bubbler legal to buy in El Paso, Texas?
Yes. The Clover 3D Grip is a glass smoking accessory for legal dry herbs and tobacco, and it is legal to buy in El Paso for adults 21 and older. Our Hosts check a valid photo ID at the counter before any sale.
How is the Clover 3D Grip hammer bubbler different from a plain hand pipe or a full water pipe?
The 3D Grip sits between the two. Like a dry hand pipe, it is pocket-size at about 161mm long with no big base. Like a water pipe, it holds a little water and runs the draw through a diffused downstem, so the pull comes through water-cooled while staying handheld.
How much water do you put in the 3D Grip Bubbler and how do you use it?
Add just enough water to cover the downstem holes, no more. Pack the bowl, cover the carb hole on the right side, and draw. Lift your finger off the carb to clear the chamber. Start with a little water and adjust until the bubbling feels right.
How do you clean the Clover 3D Grip borosilicate bubbler?
Empty the water after each use and rinse with warm water. For a deep clean, add isopropyl alcohol and coarse salt to the 3mm borosilicate body, cap the openings, and shake gently so the salt scrubs the inside. Rinse thoroughly with warm water and let it air dry before the next session.
How big is the Clover 3D Grip Bubbler and does it fit in a pocket?
It is about 161mm long, 73mm tall, and 51mm wide, and weighs close to 194g. That makes it a compact, handheld piece that slips into a pocket or bag far more easily than a full water pipe, with no large base to carry.
Is the glass on the 3D Grip thick and durable?
It is built from borosilicate glass with a 3mm wall, a thick, heat-resistant glass used across Clover's bubbler line. It stands up to normal handling, but it is still glass, so it can chip or crack if dropped. Set it on a flat surface and store it safely.
Which side is the carb hole on the 3D Grip Bubbler, and what does it do?
The carb hole sits on the right side of the piece. You cover it while you draw to build the pull, then lift your finger to let fresh air in and clear the smoke from the chamber. It gives you control over each hit.
Why is the 3D Grip called color-changing?
The glass is worked with a clear base and red and blue lines, and it is a color-changing design. The look deepens and shifts with use over time, so each piece takes on its own character. The bumpy 3D grip texture also gives your fingers a sure hold.
How do I reserve the Clover 3D Grip bubbler for same-day pickup in El Paso?
Yes. This is an in-store pickup listing at El Paso Smoke Shops. Availability varies by store, so run the live stock check to see which neighborhood shop has it, then stop by the same day. Bring a valid 21+ photo ID for the counter. Online checkout is coming soon.
You must be 21 or older to buy glass smoking accessories at El Paso Smoke Shops. Our Hosts check a valid photo ID at the counter. This is a glass accessory for legal dry herbs and tobacco only. In-store pickup only; keep out of reach of minors.
